For distributors, stockists and engineering contractors working with Russian or CIS piping specifications, GOST 17375 elbows are a common requirement for carbon steel buttweld piping systems.
The fitting itself may look simple, but getting the specification right is important. An elbow needs to match the pipe size, wall thickness, material and project standard. A mismatch can create problems during fabrication, installation or inspection.
This guide covers the key points buyers need to know when sourcing GOST 17375 carbon steel elbows, including types, dimensions, materials, applications and purchasing requirements.
If you are comparing the different GOST butt weld fitting standards, see our main guide to [GOST Buttweld Carbon Steel Pipe Fittings] for an overview of GOST 17375 elbows, GOST 17376 tees, GOST 17378 reducers and GOST 17379 caps.
What Are GOST 17375 Elbows?
GOST 17375 elbows are steel buttwelding elbows manufactured according to GOST 17375 requirements.
They are used to change the direction of a pipeline while maintaining a welded connection between the fitting and pipe. Depending on the piping layout, elbows are typically selected in different angles and radius configurations.
For industrial buyers, the most important point is that GOST 17375 is the dimensional and technical reference for the elbow, while the actual material grade and other purchasing requirements need to be confirmed according to the project specification.
GOST 17375 elbows are commonly supplied as part of a complete GOST butt weld fitting package together with tees, reducers and caps.
GOST 17375 Elbow Types
When requesting a quotation, simply writing “GOST elbow” is usually not enough. The supplier needs to know the required elbow type, size, material and wall thickness.
90 Degree GOST 17375 Elbows
The GOST 17375 90 degree elbow is one of the most widely used configurations.
It changes the pipeline direction by 90 degrees and is commonly used in process piping, oil and gas facilities, chemical plants, power plants and industrial utility systems.
For stockists and distributors, 90 degree elbows are often among the core sizes kept in inventory.
45 Degree GOST 17375 Elbows
A GOST 17375 45 degree elbow provides a smaller change in direction than a 90 degree elbow.
It can be used where a gradual directional change is required or where the piping layout does not allow a full 90 degree turn.
Long Radius Elbows
Long-radius elbows provide a smoother directional transition and are widely used in industrial piping systems.
They can be particularly useful where pressure drop, flow characteristics and maintenance requirements are important considerations.
Short Radius Elbows
Short-radius elbows have a tighter centerline radius and can be useful where installation space is limited.
However, the appropriate radius should always be determined by the piping design rather than selected only because it is more compact.
GOST 17375 Elbow Dimensions
Dimensions are one of the most important parts of a GOST 17375 elbow specification.
Depending on the required product and project specification, buyers may need to confirm:
- Nominal diameter
- Outside diameter
- Wall thickness
- Center-to-end dimension
- Elbow angle
- Radius
- End preparation
- Dimensional tolerances
For procurement purposes, the pipe outside diameter and wall thickness should be checked carefully rather than relying only on nominal size.
This is particularly important for international orders because pipe dimensions used in different markets may not always be directly interchangeable.
GOST 17375 specifies the dimensions for steel 90-degree and 45-degree seamless circular cross-section elbows with a bending radius of R ≈ 1.5DN (3D elbows).
Common GOST 17375 Elbow Dimensions Overview
| Nominal Diameter (DN) | Outside Diameter (T × H / OD, mm) | Wall Thickness Range (mm) | Radius (R, mm) approx. |
|---|---|---|---|
| DN 15 | 21.3 | 2.0 – 2.5 | 28 |
| DN 25 | 32.0 | 2.5 – 3.0 | 38 |
| DN 50 | 57.0 | 3.0 – 4.0 | 75 |
| DN 100 | 108.0 | 4.0 – 5.0 | 150 |
| DN 200 | 219.0 | 6.0 – 10.0 | 300 |
| DN 300 | 325.0 | 8.0 – 12.0 | 450 |
What Information Should Be Included in an RFQ?
A clear RFQ can be as simple as:
GOST 17375 elbow, 90°, carbon steel, DN100, required wall thickness, quantity 5000 pcs.
For a larger project, the buyer should also provide the applicable material specification, inspection requirements and documentation requirements.
Carbon Steel Materials for GOST 17375 Elbows
GOST 17375 carbon steel elbows are widely used for general industrial and process piping.
Material selection should be based on the actual service conditions rather than the fitting standard alone.
Depending on the project specification, buyers may encounter carbon steel and low-alloy steel grades such as:
- Steel 20
- 09G2S
- Other project-specified carbon or low-alloy grades
The required material should always be confirmed before production because the GOST fitting standard does not automatically mean that every elbow is manufactured from the same steel grade.
For distributors, this is particularly important when building inventory. Stocking a fitting under the wrong material designation can make it difficult to match with customer project requirements.
Seamless vs Welded GOST 17375 Elbows
One of the common questions from industrial buyers is whether a GOST 17375 elbow should be seamless or welded.
The answer depends on the required size, manufacturing route, material and project specification.
Seamless Elbows
Seamless elbows are manufactured from seamless steel pipe or other suitable seamless starting material.
They are commonly considered for applications where the project specification requires seamless construction or where service conditions justify it.
Welded Elbows
Larger-diameter elbows may be manufactured using welded starting material or a fabricated manufacturing route, depending on the applicable specification.
For procurement, it is better to state the required manufacturing method explicitly instead of assuming that “GOST 17375” alone defines whether the fitting must be seamless.
How to Select the Right GOST 17375 Elbow
For distributors, stockists and procurement teams, the following checklist can help avoid specification errors.
1. Confirm the Standard
Specify:
GOST 17375
Do not simply state “GOST elbow” when preparing an RFQ.
2. Confirm the Elbow Angle
Specify whether you need:
- 90°
- 45°
- Another project-specific configuration
3. Confirm the Size
Provide the required DN and/or actual pipe outside diameter.
4. Confirm Wall Thickness
The elbow must be suitable for the connected pipe and the required service conditions.
5. Confirm Material
State the required carbon steel or low-alloy steel grade.
6. Confirm Manufacturing Route
If seamless construction is mandatory, include it in the purchase specification.
7. Confirm Inspection Documents
Depending on the project, buyers may require:
- Material certificates
- Dimensional inspection
- Chemical analysis
- Mechanical test results
- Hydrostatic or other specified tests
- Third-party inspection
Not every order requires the same documentation, so these requirements should be agreed before production.
GOST 17375 Elbows for Distributors and Stockists
For a distributor, buying pipe fittings is different from purchasing a single fitting for a project.
The main concern is usually stock flexibility.
A distributor may need several sizes, wall thicknesses and material grades that can be supplied together and delivered on a predictable schedule.
When evaluating a GOST 17375 elbow supplier, consider:
Product Range
Can the supplier provide the sizes and configurations your customers regularly request?
Dimensional Consistency
Are different production batches controlled to the same specification?
Material Traceability
Can the supplier provide the required material documentation for each batch?
Packaging
Are fittings protected adequately for container shipment and long-distance storage?
Mixed Orders
Can elbows be combined with GOST tees, reducers and caps in one shipment?
Production Capacity
Can the supplier support repeat orders when your inventory needs to be replenished?
For stockists, these factors can be just as important as the unit price.
GOST 17375 Elbows vs Other GOST Butt Weld Fittings
Elbows are only one part of a complete GOST piping system.
| GOST Standard | Fitting | Main Function |
|---|---|---|
| GOST 17375 | Elbows | Change pipeline direction |
| GOST 17376 | Tees | Create branch connections |
| GOST 17378 | Reducers | Connect different pipe sizes |
| GOST 17379 | Caps | Close pipe ends |
If you are sourcing a complete range, it is often more efficient to request the four fitting groups together.
See our complete guide to GOST Buttweld Carbon Steel Pipe Fittings for an overview of the full product range.
Applications of GOST 17375 Carbon Steel Elbows
GOST 17375 elbows can be used in a wide range of industrial piping systems, including:
- Oil and gas
- Petrochemical
- Chemical processing
- Power generation
- Industrial water systems
- Heating systems
- Gas processing
- General process piping
The final material and fitting configuration should always be selected according to the actual operating temperature, pressure, medium and applicable project specification.
How to choose a Good GOST 17375 Elbow Supplier?
For overseas buyers, the lowest quotation is not necessarily the lowest procurement cost.
A reliable supplier should be able to provide consistent dimensions, correct material identification and the documentation required by the project.
For distributors and stockists, additional considerations include:
- Stable production capacity
- Repeat-order consistency
- Export packaging
- Container loading experience
- Mixed-size orders
- Short and predictable lead times
- Clear communication during production
- Inspection before shipment
These details become particularly important when the fittings are being purchased for inventory rather than for a single project.
GOST 17375 Elbows — FAQ
What is GOST 17375?
GOST 17375 is a Russian standard for steel butt-welding elbows. It is commonly referenced when specifying elbows for piping systems designed around GOST requirements.
What sizes are available for GOST 17375 elbows?
Available sizes depend on the applicable specification and manufacturer. When requesting a quotation, buyers should provide the required DN or pipe outside diameter rather than relying on a general size range.
Are GOST 17375 elbows available in carbon steel?
Yes. Carbon steel is commonly used for GOST 17375 elbow applications. The exact material grade should be specified according to the project requirements.
Can I buy GOST 17375 elbows together with tees and reducers?
Yes. For project procurement or distributor inventory, GOST 17375 elbows can be sourced together with GOST 17376 tees, GOST 17378 reducers and GOST 17379 caps.
What should I include when requesting a quotation?
At minimum, provide the GOST standard, elbow angle, size, wall thickness, material grade and quantity. Inspection and documentation requirements should also be stated when applicable.
Source GOST 17375 Elbows for Your Inventory or Project
If you are a pipe fitting distributor, stockist, wholesaler or EPC contractor, a clear specification is the best starting point for sourcing GOST 17375 elbows.
Whether you need standard 90° elbows, 45° elbows, different sizes for stock, or a mixed order of GOST butt weld fittings, the supplier should be able to confirm the dimensions, material and documentation before production.
For a complete GOST fitting package, you can also source:
- GOST 17376 Tees
- GOST 17378 Reducers
- GOST 17379 Caps
See our GOST Buttweld Carbon Steel Pipe Fittings for the complete GOST product range, or contact JS FITTINGS/RAYOUNG with your size, material and quantity requirements for a quotation.
Email: info@hb-steel.com
Whats App: 008618003119682